Click on the image to check the artwork
Basic Info
Model NO.: KRV35PP
Trademark: NA
Origin: Changzhou Jiangsu
Seal: Gap Seals
-
Specification: ISO9001
Product Description
Stud type track rollers : are complete units consisting of a machined stud,thrust washers,an outer ring
and a needle roller and cage assembly or a full complement needle or cylindrical
roller set.
have a thick-walled outer ring with a crowned outside surface
can support high radial forces
are greased with lithium complex soap grease to DIN 51825-KP2N-25
can be relubricated through the stud
are protected against contaminants and water spray by -lip seals
-gap seals
-labyrinth seals
are easy to fit due to- a thread on the end of the stud
- a slot or hexagonal socket in the ribbed end of the stud
and a needle roller and cage assembly or a full complement needle or cylindrical
roller set.
have a thick-walled outer ring with a crowned outside surface
can support high radial forces
are greased with lithium complex soap grease to DIN 51825-KP2N-25
can be relubricated through the stud
are protected against contaminants and water spray by -lip seals
-gap seals
-labyrinth seals
are easy to fit due to- a thread on the end of the stud
- a slot or hexagonal socket in the ribbed end of the stud
|
Outside diameter |
Designation | Mass |
With eccentric collar designation |
Mass | Dimensions |
Nut tightening torgue Nm |
Basic load rating |
Fatigue limit load KN |
Speed min |
||||||||||||||||
| D | d | C |
r min |
B | B1 | B2 | G | G1 | M | M1 | C1 | d2 | Eccectric collar | ||||||||||||
|
d1 h9 |
B3 | e |
dyn. Cw KN |
stat Cow KN |
|||||||||||||||||||||
| 35 | KRV35PP | 171 | 35 | 16 | 18 | 0.6 | 52 | 32.5 | 8 | M16X1.5 | 17 | 6 | 3 | 0.8 | 27 | 20 | 14 | 1 | 58 | 9.7 | 14.1 | 1.68 | 3600 | ||